About Obstructive Sleep Apnea

Sleep Diagnostic

Sleep Devices

Respiratory Devices

About VitalAire-Avattvon

Launching First week of Oct 2016!

User Friendly Design: The New DreamStation machine body weighs about 800g, making it smaller and lighter than the System One models by Respironics. The machine's a large navigation dial is intuitive and convenient, with the bright, front facing display with simple menus, icons and labels that are easy to understand. The machine's ambient light sensor adjusts display brightness automatically depending on light levels in the room. Menus and settings are navigated through and changed by turning and pressing the dial as needed.

Heated Humidifier: The Heated Humidifier connects directly to the machine and features dry box technology to help reduce the chance of water entering the machine from the humidifier. The humidifier can be set in a standard heating mode which provides constant heat levels throughout the night, with settings of 0 to 5 with 0 being off and 5 being the highest heat. Adaptive mode is also available which monitors ambient humidity and automatically adjusts heat levels during the night to provide optimum humidity. Preheat will heat the humidifier up to 30 minutes before starting therapy. 

Advanced Features Incorporated

The DreamStation Auto CPAP has many advanced features included to help the user track and monitor therapy effectiveness. Some of the incorporated features include:

SmartRamp: Unlike a traditional ramp that increases pressure constantly over a set amount of time, SmartRamp will monitor the user and increase pressure only if an event occurs. During SmartRamp if an event requires which requires the lowest pressure of the APAP range, ramp will conclude. Traditional ramp is also available if desired. The APAP therapy range must be greater than 4 cm H2O in order for ramp to be used.

Advanced Data Displayed: The machine will show on-screen advanced data such as AHI, Periodic Breathing, Leak Rate, and Therapy Hours. It will also show the pressure the machine was at or below 90% of the time, which is used for Opti-Start.

Mask Fit Check: This feature will provide airflow to the mask and display if leaks are detected in the mask. As the mask is adjusted the machine's display will update to advise if a proper fit is detected.

Auto On/Off: The DreamStation APAP can detect if the user has their mask on or off and will begin or stop therapy accordingly, if enabled.

Regular Alerts/Reminders: Every 30 days the machine will show a reminder to change filters.



Auto BiPAP

Size - Machine alone:

7.6 in W x 6.2 in L x 3.3 in H

7.6 in W x 6.2 in L x 3.3 in H

Size - Machine with Heated Humidifier

7.6 in W x 11.2 in L x 3.3 in H

7.6 in W x 11.2 in L x 3.3 in H

Weight - Machine alone:

1.23 Kg


Weight - Machine with Heated Humidifier


1.8 kg

Noise Level:

25.8 dBA



4 cmH2O t0 20 cmH2O

4 cmH2O to 25cmH2O

Easy Breathing



Auto ON / OFF



Mask Fit Check:




       website managed by VitalAire - Avattvon Singapore Pte Ltd